MODEL RANGE - TSC 2

The TSC 2

Transducer Display Instrument

FEATURES

• 4.5 Digit Display with programmable decimal points. Back lit.

• Programmable limits, filter, sample rate

• Minimum, maximum and average recording and display

• RS232 or 485 output

• Mains powered with power filter

• Robust metal case

SPECIFICATION

Maximum, minimum, readings since power up.

Average: 2, 4 or 8 sample, programmable.

Torque Signal output Bipolar : +/- 1V dc for rated capacity

Output : RS232 or RS485  

Decimal point Ranges: 0.0001 1 to 19999

Operating Temperature Range : -10 deg. C to +50 deg. C

Input Power Requirements : 230 V AC 50Hz 150 mAmp

Accuracy : +/- 0.01% of FSD 1% of RDG from 10-110% FRO

Linearity : +/- 1 count

Display: 4.5 digit LCD 10 mm high, back lit

Display Sample Rate : 4 per second

Frequency Response Analog output: Better than 2.5KHz

Temperature Coefficient: 30 p.p.m per degree C

Alarm Limits: 2 ( High & Low)

Limits Hysteresis : settable

The TSC 2 Transducer Display Instrument is a mains powered unit to power amplify and display readings from any of TSC/AWS transducers and other similar amplified strain gauge transducers.
Readings are displayed on a 4 1/2 digit back lit LCD display.
Program buttons allow for setting decimal points, filter response, reading Rate, minimum, maximum and average computed readings.
Digital alarm levels with settable hysteresis levels and buzzer are also standard.
The signal from the transducer is also outputted via a BNC connector on the front panel.