MODEL RANGE - RTOPT

The TSC series of New Rotary Torque Transducers are non-contact optical devices with the addition of integral speed or angle sensors and output. 

FEATURES

•  Very Low torque at high speed capabilities

•  Non Contact

•  Low Inertia

•  High Speed

•  High Sensitivity and Frequency Response

•  RPM or Angle encoder as standard

•  Solid State Optics

SPECIFICATION

Accuracy : +/-1.0 of FSD 1% of RDG from 10-110% FRO

Linearity : +/- <0.6% of FSD

Hysteresis : +/- 0.1% of FSD

Repeatability : +/- 0.2% of FSD

Frequency Response : Better than 100uS

Temperature Coefficient: 0.1% per degree C

Overload Capacity : In excess of 150% of rated capacity

Operating Temperature Range : -10 deg. C to +60 deg.C

Input Power Requirements : 12 Volts dc, 150mA

Torque Signal output Bipolar : +/- 1V dc for rated capacity

Speed : Speed standard 20000 rpm Higher Speeds available

Torque Ranges: 1mNm to 2000Nm

Larger sizes can be supplied on request

New Rotary Torque Transducers
The TSC series of New Rotary Torque Transducers are non-contact optical devices with the addition of integral speed or angle sensors and output. It has on board , amplifiers and signal conditioning to output high level signals. Operates by applied Torsion causing a variation in the volume of light. Solid state light sources ensure a very robust and low power demand transducer . Torque output signal is an equivalent analogue voltage. Angle output is a pulse for every degree of rotation or speed output is a pulse for every 6 degrees of shaft rotation. Low inertia parts and non-contact measurements enables the TSC torque transducer to operate to high speeds and sensitivity. This technology allows for a wide range of torque capabilities. Signal processing carried out within the transducer allows for connection cables in excess of 100 meters if required. Mounting of the transducer is by base, flange or in-line between suitable couplings. The advanced technology of the TSC torque transducer reduces maintenance requirements. This feature is especially useful in long operational and arduous conditions. Applications: R&D; Process Control; Engineering and technological Development for motors, motor drive systems, compressors, transmission systems and generators, mixers.